Injection Pressure Regulator (IPR) Valve is located in the valley on the High Pressure Oil Pump (HPOP). These can stick, seals get damaged, have the sensor go bad or the wires get damaged. Locate the IPR Valve, check for loose or damaged wires, check that the tin nut on the back of the IPR sensor is tight. When reinstalling the IPR unit torque the IPR to 35ft/lbs and do not use sealer on the IPR threads, as there is an orifice in the threaded area which the sealer could plug.
Related Products
Order online and have your products delivered to your closest store for free
-15%
MBRP 4" Installer Series Turbo-Back Exhaust System (W/ Muffler & Tip) 94-97
S6218AL The Best Systems Start with the Best Materials Built from heavy duty aluminized steel our Installer Series exhaust systems offer a value price without compromising on the quality built...
-15%
$514.24
$604.99
-15%
MBRP 3" Downpipe 94-97 OBS
MBRP down pipes are jig manufactured to ensure total accuracy. Smooth mandrel bends will give you the best flowing down pipes in the industry. Gain extra power and enjoy the...
-15%
$131.74
$154.99
94-97 OBS 7.3 S&B Cold Air Intake
Features a large cleanable intake filter that will last thousands of miles. This kit replaces the entire stock intake box and removes the restrictions giving more power, better economy, and...
$349.00
94-97 OBS 7.3 AFE Pro 5R Cold Air Intake 54-10792
C.A.R.B. OE# D-550-4 Increases horsepower & torque. Improved performance results in greater fuel efficiency No cutting or drilling to engine compartment is required Installs in less than 60 minutes using...
$391.00
CNC Fabrication 7.3L Replacement HPOP lines
CNC Fab Description: Replace your high-mileage (and expensive) OEM High Pressure Oil Pump lines with a CNC Fabrication upgrade! Advanced HPOP lines featuring top-of-the-line Aeroquip® hoses with DuPont Teflon™ lining....
$169.95
CNC Fabrication 7.3L Replacement HPOP lines W/ HPX
CNC Fab Description: Replace your high-mileage (and expensive) OEM High Pressure Oil Pump lines with a CNC Fabrication upgrade! Advanced HPOP lines featuring top-of-the-line Aeroquip® hoses with DuPont Teflon™ lining....
$224.95
CNC FABRICATION 7.3L STAGE 1 HIGH PRESSURE OIL PUMP
Approximately 3-4 Week Lead Time - maybe quicker lead time on 94.5-95 Pumps EXCEEDS OEM VOLUME AND PRESSURE. THESE PUMPS GO THROUGH RIGOROUS BENCH TESTING AND IF THEY DO NOT...
$579.95
CNC FABRICATION 7.3L STAGE 2 HIGH PRESSURE OIL PUMP
Typically this pump will flow 30% more than a brand new Bosch 99.5-03 pump, which is plenty enough volume to sustain 250/100 hybrid injectors. 250/200's can be ran with this...
$749.95
Sleeve High Neck Bodycon Dress
$132.00
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Nam fringilla augue nec est tristique auctor. Donec non est at libero.